A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders

A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders in Chad

A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders, 6061 T6 Aluminum Sheet: This alloy has a very good corrosion resistance and finishing ability, welding goes without any problems too. The strength level of 6061-T6 aluminum sheet is about that of mild steel. 6061-T6 aluminum sheet can be fabricated by most of the commonly used techniques. Typical uses are aircraft landing mats, truck bodies and frames, structural components and more.

A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders in Sao Tome and Principe

the glossThe 60° gloss value of the coating shall be in accordance with the contract, with an allowable deviation of ±5 gloss units. the color and color differenceThe color of the coating should be substantially the same as the standard swatch specified in the contract. When measured by an instrument, the color difference ΔEab* ≤ 1.5 between the monochromatic coating and the standard swatch, and the color difference ΔEab* ≤ 1.5 between the same batch of products. the dry film hardnessThe coating was tested by pencil scratch and the hardness was ≥1H. the adhesion of the color coated aluminum sheet coilThe dry, wet and boiling water adhesion of the coating should be level 0. the impact resistanceThe front side of the coating shall not crack or fall off after the impact test, but fine wrinkles are allowed at the periphery of the depression. the wear resistance of 5052 color coated aluminum sheet coilAfter the falling sand test, the wear coefficient should be ≥1.6 L/μm. the resistant to hydrochloric acidAfter the coating was tested with hydrochloric acid, the surface of the coating should be visually inspected for no air bubbles and other significant changes., A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders

Aluminum tread plate also named aluminum checkered plate, aluminum checker plate, is made of series high grade aluminum alloy. It is embossed to different patterns on one side of the aluminum sheet. The pattern can be diamond, bar, willow, lentils and so on.

10" Wide x 33" long x 17" tall. This aluminum tread plate, Jeep-style fender is an application for 13-15" wheels. The fender has a 1/2" radius lip on the front and back. Features: Weld-on or bolt-on application Drilling required for bolt-on Mounting hardware sold separately 1/2" Radius lip on front and back of fender Aluminum tread plate construction Made

Location: Boynton Beach, FL

offers 531 aluminum tread plate 1050 h14 products. About 79% of these are aluminum sheets. A wide variety of aluminum tread plate 1050 h14 options are available to you, such as 3000 series, 1000 series, and 5000 series.

To achieve this temper, the metal is strain hardened to a strength that is roughly halfway between annealed (O) and full-hard (H18). The graph bars on the material properties cards below compare 5005-H14 aluminum to: 5000-series alloys (top), all aluminum alloys

Jul 01, 2019· Set of (2) Square Aluminum Tread Plate Cargo Trailer Fenders This is a pair of flat top Aluminum Tread Plate Trailer Fenders. THIS SHIPS IN CONTIGUOUS 48 STATES ONLY. Overall dimensions of 34"L x 17.25"H x 10"W Made out of .057 aluminum tread plate Fenders have a 1" round lip front and back Fits 14", 15" and 16" trailer tires Not Intended for

5/5(6)[PDF]

SIZES RANGE FOR AA5005-H14 We stock Aluminium Alloy AA5005-H14 at our warehouses in Dubai and Sharjah. Please contact us on [email protected] with your inquiries or

A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders in Seychelles

A5005 H14 H16 Anti-corrosion aluminum tread plate for fenders, 1050 aluminum plate belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum plate, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum plate. haomei aluminum can reach this standard. For its simple processing technology, 1050 aluminum plate is much cheaper comparing to other aluminum alloys plate and it is very commonly used in industry.

Other Solution